Send Message
Home > products > Pico Laser Tattoo Removal >
Portable Metal Pico Laser Tattoo Removal 1064nm / 532nm Single Power 500mj

Portable Metal Pico Laser Tattoo Removal 1064nm / 532nm Single Power 500mj

500mj Pico Laser Tattoo Removal

Metal Pico Laser Tattoo Removal

1064nm Portable Pico Laser

Place of Origin:

Beijing, China

Brand Name:

Snail Medical

Certification:

CE, ISO 13485

Model Number:

PicoWill

Contact Us

Request A Quote
Product Details
Laser Type:
Pico Laser
Wave Length:
1064/532nm
Pulse Width:
300-500ps
Conduct:
Articulated Arm HM Korea
Spot-size:
1-10mm
Frequency:
1-10hz
Pulse Energy:
500mj@1064, 350mj@532
Matarial:
Metal
Size:
350x650x1250mm
Net Weight:
75Kg
Input Power:
1200 Watts
Input Voltage:
110/220V Single Pulse
Product Description

1. Pico Second Laser Tattoo Removal with Pulse Widht 300-500ps

Laser unit pulse refers to the time that light travels through the skin and remains there. Picosecond laser refers to the ability to inject light into the skin in just one billionth of a second, allowing energy to be instantly released.

Laser unit pulse refers to the time that light travels through the skin and remains there. Picosecond laser refers to the ability to inject light into the skin in just one billionth of a second, allowing energy to be instantly released. The principle of pigment explosion is that the honeycomb picosecond laser adopts the photothermal principle, using a 755nm wavelength paired with a honeycomb lens to concentrate 70% of the laser energy into the deep skin, locate melanin, and instantly crush melanin. The principle of light and heat is a double-edged sword, which can indeed promote the revival of teachers' recitation, but at the same time, there are also thermal injuries, longer pain and recovery cycles.

Portable Metal Pico Laser Tattoo Removal 1064nm / 532nm Single Power 500mj 0

2. Machine specifications

1. LCD monitor

Monitor:10 inches real color touching LCD.

2. System: micro-computer control system, based on single-chip.

3. Interface: Windows photographic interface.

4. Safety check: all time.

5 Safety check standards: water current check, water level check, water temperature check, water quality check, over-loaded check, charging check, simmer ok, alarm over energy output.

6. 1064nm

Energy: 500mj

Frequency: 1-10hz

Pilot 635nm 3mw

 

532nm

Energy: 50-250mj

Frequency 1-10hz

Pilot: 635nm 3mw

 

7. Work mode: 1064nm, 532nm, Pixel

8. Pulse width: 350PS

9. Laser conduct: Seven joints articulated arm made by Korea special for Pico

10.Headpieces: 1064nm&532nm focus headpiece & fractional headpiece

11.Electric safety: Class I BF

12.Input voltage: AC220V, 50HZ / AC 110V 60HZ

13.Input power: 1500 VA

14.Net weight: 100kg

15.Malarial: Metal

16.Size: 420x800x1250mm

17.Packing size: 650x1100x1200mm (laser body)

250x350x1200mm (Arm)

 

3. Headpiece

One:Headpiece functions

Headpiece Spot-size Pilot beam Data back Counter Switch
1064nm 2-10mm 635nm diode Spot-size no Foot-pedal
532nm 2-10mm 635nm diode Spot-size no Foot-pedal
Pixel 10mm 635nm diode Spot-size no Foot-pedal

Two Wavelength VS Colors

Wavelength Headpiece Colors removal
1064nm 1064&532nm Black and dark blue
532nm 1064&532nm Red, Brown, yellow and pink
1064nm Pixel Pigmentation
650nm (option) 650nm Green

 

Portable Metal Pico Laser Tattoo Removal 1064nm / 532nm Single Power 500mj 1

 

4. Treatment

Parameter table:

Note: the parameters table for factory advice, not as a treatment for accurate parameters.The operator shall, according to customer's actual situation, reasonably adjust the parameter.

Tattoo Removal

Tattoo color wavelength Energymj Spotsize mm Frequency

Dark

Black,

Dark blue

1064nm 200-300mj 5-6mm 5-6

Red

Blown

Yellow

532nm 200-300mj 5-6mm 5-6

 

Pigmentation

Pigmentation color Wavelength Energy mj Spotsize mm Frequency

Dark,

Black

Dark blue

1064nm 200-300mj 5-6mm 3-4

Red

Blown

Yellow

532nm 200-300mj 5-6mm 3-4

 

1064 nm: black, grey, blue, grey..
532 nm: red, brown, deep yellow, dark red...
Pixel: pigmentation

After treatment, the skin will be returned to the color, according to the color of color to choose laser head.

 

 

 

 

5. clinical operation steps

  1. 1064 & 532 nm focus laser head for black color tattoo removal as an example, other headpieces with similar operation methods, no longer introduced.
  2. According to the different types of tattoo, skin color, health conditions, such as treatment parameters and input.This set of parameters set for factory advice, not as a treatment for accurate parameters
  3. Clear out the patient's skin above coating (cosmetics etc), removing the body worn accessories, and clean the skin with water and soap.
  4. Take pictures before treatment for patients with inputting and contrast effect after treatment.In not open flash mode, the picture is clear, high resolution
  5. Hair treatment (if any).A razor shave hair, and clear the skin on the surface of the broken hair, make sure there are no broken hair from the skin surface
  6. Once again, clean the skin surface
  7. At the treatment site applied anesthetic cream, and stay for half an hour. Then erase anesthetic cream
  8. Ensure that all the people present have taken appropriate measures.The operator and assistant personnel wear protective glasses, patient wearing opaque goggles.If the eye-patch is not suitable the facial type of patient, leaving the transparent gap, used scissors to cut a small towel, placed above the eyes, then wear eye-patch.
  9. Start interface’s red aiming-pat system
  10. Press the "ready" button of interface, lights up, start charging.After waiting for a few seconds, press the "work" button.
  11. Correct installation Focusing optical head.
  12. Treatment head gently pressure test.Test treatment should be selected in the main treatment part, and the conditions of the skin in the average state.
  13. Stepped on the pedal, laser emission.
  14. Once the laser emission, raise head treatment, complete the test.
  15. Observation test parts of the pigment reaction, ask the patient's feelings, dressing parameters.If the parameter suitable,the treatment beginning
  16. Treatment began, a spot near to next spot, leaving no gaps among, and avoid duplication.If any urgent or unexpected happens, press the emergency button, emergency shut down the machine, stop the operation.
  17. Treatment ends, the machine to "standby" state, clean laser head, laser arm is placed in right position
  18. Patients might lie in bed for 20 minutes, ice compress remove red available at this time
  19. Wipe the skin, skin moisturizing, end of treatment

 

6. Environment

Air quality:

The system should work in a non-corrosive environment. Corrosive substances, such as acids, etc., may damage the surface of the wires and electronic equipment. Dust in the air should be kept to the minimum. Metal particles have a corrosive effect on the electronic device.

 

Temperature and humidity

Working temperature: 10-30oC

keep temperature: 0-55oC

Working Relative Humidity:max 80%

Storage relative humidity: Max 90%

Atmospheric pressure: 860hPA—1060hPA

Environmental requirements: Avoid the sunshine

 

7. FAQ

Pico Second Laser Machine

 

Q1. Can I have a sample order for PicoLaser?

A: Yes, we welcome sample order to test and check quality.

 

Q2. What about the lead time?

A: 10-14 days for Sample preparing, 14-28 working days for mass production.

 

Q3. Do you have any MOQ limit for PicoLaser?

A: Low MOQ, 1pc for sample checking is available.

 

Q4. How do you ship the goods and how long does it take to arrive?

A: Ship by DHL, UPS, FedEx or TNT. It takes 7-10 days to arrive. Airline and sea shipping also optional.

 

Q5. How to precede an order for PicoLaser?

A: Firstly, let us know your requirements or application.

Secondly, we quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

 

Q6. Is it OK to print my logo on the front cover and on the headpiece?

A: Yes. Please inform us formally before our production.

 

Q7: Do you offer warranty for the products?

A: Yes, we offer 1 million shots or one year warranty for quality.

 

Q8: How to deal with the faulty?

A: Firstly, our products are produced in strict quality control system and the defective rate will be less than 0.2%.

Secondly, during the warranty period, we will ask or local service to contact you. If your location is far away from our local service, we will arrange engineers to check online and offer you technical solutions, and we will ship you newly parts without costs to replace

 

Send your inquiry directly to us

Privacy Policy China Good Quality Laser Beauty Machine Supplier. Copyright © 2023-2024 laserbeauty-machine.com . All Rights Reserved.